Selling Leads

Hot rolling pulley

Hot rolling pulley

Hot rolling pulley -my company new product in recent years, it has been widely used in lifting, transport, port handling, ship manufacturing, grab, pulley block, mining machinery, metallurgical machinery, construction and installation and so on. After the forged pulley and double spokes pulley, the new product hot rolling pulley has been well recognized by the users. The nonstandard products...

Horizontal Double Hooks

Horizontal Double Hooks

1.       It is easy to be manufactured, and the operation space is large. 2.       But the operation work is fussy, it should be confirmed that the vision field of the driver is good. 3.       Else the ground personnel should cooperate with the operation, and confirm the hook...

C-Type Hook

C-Type Hook

Mainly used for lifting the coil in horizontal and maked in low carbon alloy steel.

Single Beam Vertical Coil Clamp

Single Beam Vertical Coil Clamp

1.High operation efficiency. 2. The rake angle should be controlled between 3-5° after the vertical coil is held by the clamp. 3. When the clamp is used to loading and uploading trains, it can be laid on the carriage side of the carriage. 4. The jaw which is infixed into the internal roll has teeth with it. After a steel coil is lift, the round edge of it has no indentation, and...

Electric Horizontal Coil Clamp

Electric Horizontal Coil Clamp

1.The clamp is driven by torque electric engine, and the clamp leg can be implemented parallel move by sprocket, worm-gear, worm speed reducer, gear and gear rack. 2. After the clamp holds a steel coil, it will open about 40mm automatically to confirm that the steel coil won’t be damaged. 3. The internal-external stroke should be located by a fixed stopper. The performance of it...

Mechanical Horizontal Coil Clamp

Mechanical Horizontal Coil Clamp

1.The operation efficiency is high, and the loading uploading rate of mechanical horizontal coil clamp can be increased one time higher, being compared with electric horizontal coil clamp. 2. No damage steel coil. 3. Operation is convenient, which can be implemented by lifting hook only, 4. Electric source is not needed. It is applicable in high and low temperature...

Steel Ingot Clamp

Steel Ingot Clamp

Characteristic: 1. The switching of the clamp is controlled by gravity start and stop structure. 2. A big enough clamp force is generated by the leverage. The slab is held by friction force which is generated by the clamp force. 3. The clamp has two pairs of demountable teeth, which is forged by the high strength alloy-steel. 4. There are many structures after the...